what is the impact of the furnace water ph

what is the impact of the furnace water ph

high-efficiency furnace: water discharge

Will Furnace Condensate Corrode Plumbing? | Building Advisor

Get a Quote

Watering plants with gas-furnace water? - pennlive.com

A 60,000-Btu furnace operating 50 percent of the time will produce about seven gallons of condensate a day. The condensate has a pH level of about four, which is about the same as a carbonated soft drink. However, furnace condensate is not safe to drink because of trace toxic chemicals it contains.

Get a Quote

Effects of low pH on Copper pipes?

Re: high-efficiency furnace: water discharge; Author: Anonymous User Wisconsin code Comm 23.156 requires this discharge to sanitary sewer because of the low pH, being acidic in nature. The condenstae is not allowed, under any circumstance, to be discharged to a clear water site drain, a clear water sump, to grade, or to subsurface soils.

Get a Quote

Factors affecting pH of Water

02/03/2019 · High pH causes a bitter taste, water pipes and water-using appliances become encrusted with deposits, and it depresses the effectiveness of the disinfection of chlorine, thereby causing the need for additional chlorine when pH is high. Low-pH water

Get a Quote

pH in Drinking-water - World Health Organization

23/10/2015 · The 14-point pH scale of acidity runs from 0 at the far acidic end to 14 at the far alkaline, or basic, end, with pH 7 denoting a neutral solution. Furnace condensate typically ranges between 3.0 and 5.0, but it can get stronger: in a YouTube interview with hvac trainer Bruce Marshall of Emerson Swan, Mike Bernasconi says he has measured condensate as low as 1.8 or 2.0 in part because of the effect

Get a Quote

Factors That Affect pH - Weebly

Although pH usually has no direct impact on water consumers, it is one of the most important operational water-quality parameters. Careful attention to pH control is necessary at all stages of water treatment to ensure satisfactory water clarification and disinfection. For effective disinfection with chlorine, the pH should preferably be less than 8.

Get a Quote

Will Furnace Condensate Corrode Plumbing? | Building Advisor

01/01/2019 · Condensate from a high-efficiency furnace typically has a pH of about 5.0, but can range from 3.5 to 6.5. Its important to note that pH is a logarithmic scale, so pH 5 water is 10 times more acidic than pH6. If the water sits in a trap and evaporates, the acidity and corrosive effect will increase.

Get a Quote

Drain Pain: Furnace Condensate Proves Tricky to Manage

Will Furnace Condensate Corrode Plumbing? | Building Advisor

Get a Quote
Copyright © 2019 Boiler. All Rights Reserved.